My Experience Using Minwax Oil Based Penetrating Stain And Varathane Wiping Stain

Another benefit that comes from this product is that it can enhance the natural grain of the wood. Something like this will create a unique value to your wood project. Worry no more, my friend since among so many products you can find right now. Some are proven to stand on the top positions in the chart.

varathane vs minwax stain

Then, you could do a table runner in the same fabric that is on the back of your chairs? The possibilities of adding different fabric table runners in your colors could add interest and you could change it out whenever you wanted to. You are correct that you can’t paint latex over oil-based paint though. My husband used to work for Lowe’s, but I really never bought any paint for important projects there because they just did not carry great quality paint. If I found anything I liked, you can bet they discontinued it.

Varathane Stain Any Good?

You’ll get a really good finish on softwoods and hardwoods alike. Rust-Oleum stain seals against leaks and moisture damages. You can apply it with any standard brush fairly easily. It’s thick enough to fill gaps and cracks in hard to reach areas when used liberally. A standard application will usually dry within one hour after applying.

The only potential downfall is that they recommend a minimum of 3 or 4 coats. So if time is on your side, and you want to best protect your floors, Varathane Premium Finish is what you want. Between coats, BE PATIENT. You cannot rush perfection.

Hardness affects how wood absorbs stain – hard woods tend to accept stain more evenly. I have started the process of making cabinets for the kitchen out of quarter sawn oak. I decided to mess around with other brands of stain and polyurethane. I am using Varathane wiping stain and if you have a spot of glue or something you miss, you can sand it and reapply the stain.

Staining Soft Woods

Varathane supplies many markets including begainer and several specialty markets with price competive products. While Varathane has a product for any refinishing job,non are the best available for that piticular application. Minwax isn’t varathane vs minwax stain the best either but to their credit they do an exelent job of guiding casual wood finishers through the process of finishing wood. I highly reccomend going to Minwax’s website and reading through it then following their reccomendations.

  • With that said I am also looking into Laglers Trio.
  • So, when you apply thin-bodied stains to them, you can get splotchy areas of light and dark staining because of uneven absorption.
  • Starting on page 32 of their color catalog;can see that both dye stains and pigmented stains are available in a plethora of colors.
  • The material of a gel stain is thick and certainly not like a liquid.
  • It’s not unusual to do four or five coats before it starts to look good.

Fortunately, I have a pro who will be finishing them – I just need to come up with the color I want. If you’re worried about the fumes, a respirator mask would be a great idea. However, when possible, try to use this product in a ventilated area. You can add a fan facing out of the room or open a few windows too.

I think this is a matter of personal preference. MinWax and Varathane are both owned by Sherwin Williams. It would probably take a laboratory to document the difference between the two, but I’ve always considered MinWax the Harbor Freight of finishes . I did just use some Varathane Gel Stain for the first time and it worked quite well. Semi-opaque—imparts deep color and obscures most of the wood grain. Choose the right stain to enhance the look and durability of your wood projects, indoors and out.

varathane vs minwax stain

If you want to keep and maintain the natural appearance of your wooden furniture, a gel stain is a good solution. Thus, we’ve gathered a list of reviews featuring the best gel stain available in the market along with their pros and cons. Most fine oil finishes varathane vs minwax stain consist of several coats, and you have to decide for yourself how far to go with this. At some point the finish will “pop”, that is, it will start to look right. By wiping the finishing product on and then off, you are achieving very fine, even coats.

I happen to have a check from them to me for $1500 that I’m holding until the project is done, because they owe me on a job I did for them. But they’re actually good guys and I’d like to maintain a good professional relationship with them. I’m sure we can work something out, I just need to have all the specifics in my head before I start talking to them about it. They do, but I am not sure how it would protect the interior stain from fading. Probably need to confirm the UV protection and not just water protection. Interior lacks the UV protection of the exterior product, so it will fade if exposed to the sun.

I must say that I event beging to like the smell of the Minwax finish. But after a few days, the carvings I applied the Varathane finish doesn’t smell anything, so I expect the Minwax to be the same. Then, remove all sawdust with a shop vacuum and varathane vs minwax stain wipe the project with a dry cloth. Finally, use a tack clothor clean cloth moistened with mineral spirits to clean off any remaining sawdust. A perfectly clean surface is critical to the success of the conditioner and the application of stain.

I like their stains a lot, and would recommend them to anyone looking to stain wood. The first thing that I consider when staining is what kind of wood I am working with. A natural wonder such as Walnut, Pau ferro, Cocobolo, or the like? If you apply stain to any such exotic or beautifully figured dark wood, hang up the tools and find a new hobby. If it is a particularly hardwood like hard maple, oak, or hickory for example, the stain applies really well directly on the wood. Think of it as spreading an even coat of water onto a granite counter top with a squeegee.

My bedroom is now Teal and coral and it looks beautiful. What is the sheen of paint you are trying to coat? If is anything other than flat, the paint itself might be shedding off the water in your clear coat. That was my first time using Polycrylic, so I thought maybe I just got a bad batch, or that the weather that day was having a horrible effect on it.

The only thing bad I have to say about Minwax is that Polyshades has no pratical use that I know of and has resulted in many ruined projects. Sadly,consumers continue to demand a single coat stain and topcoat product so Minwax,Varathane and all other brands marketing to homeowners sell them. I hope I havn;t confused you and made you ask why I don’t tell you the best brand and be done with it.

Source: https://homemakerguide.com/

Leave a Comment

Your email address will not be published. Required fields are marked *